GB/CB/1916 Design Study Alt-2, Great Britain Battlecruiser laid down 1916 (Engine 1950)
Displacement:
43,592 t light; 46,075 t standard; 47,500 t normal; 48,640 t full load
Dimensions: Length overall / water x beam x draught
951.99 ft / 950.00 ft x 110.00 ft x 38.00 ft (normal load)
290.17 m / 289.56 m x 33.53 m x 11.58 m
Armament:
6 - 18.00" / 457 mm guns (2x3 guns), 2,916.00lbs / 1,322.68kg shells, 1916 Model
Breech loading guns in turrets (on barbettes)
on centreline ends, evenly spread
12 - 5.00" / 127 mm guns in single mounts, 62.50lbs / 28.35kg shells, 1916 Model
Quick firing guns in deck mounts with hoists
on side, all amidships
Weight of broadside 18,246 lbs / 8,276 kg
Shells per gun, main battery: 150
Armour:
- Belts: Width (max) Length (avg) Height (avg)
Main: 4.00" / 102 mm 640.00 ft / 195.07 m 9.00 ft / 2.74 m
Ends: Unarmoured
Main Belt covers 104 % of normal length
Main belt does not fully cover magazines and engineering spaces
- Gun armour: Face (max) Other gunhouse (avg) Barbette/hoist (max)
Main: 6.00" / 152 mm 4.00" / 102 mm 6.00" / 152 mm
- Armour deck: 2.00" / 51 mm, Conning tower: 6.00" / 152 mm
Machinery:
Oil fired boilers, steam turbines,
Geared drive, 8 shafts, 535,448 shp / 399,444 Kw = 42.00 kts
Range 4,500nm at 15.00 kts
Bunker at max displacement = 2,565 tons
Complement:
1,608 - 2,091
Cost:
£8.566 million / $34.265 million
Distribution of weights at normal displacement:
Armament: 2,281 tons, 4.8 %
Armour: 4,899 tons, 10.3 %
- Belts: 960 tons, 2.0 %
- Torpedo bulkhead: 0 tons, 0.0 %
- Armament: 1,362 tons, 2.9 %
- Armour Deck: 2,408 tons, 5.1 %
- Conning Tower: 170 tons, 0.4 %
Machinery: 12,810 tons, 27.0 %
Hull, fittings & equipment: 23,602 tons, 49.7 %
Fuel, ammunition & stores: 3,908 tons, 8.2 %
Miscellaneous weights: 0 tons, 0.0 %
Overall survivability and seakeeping ability:
Survivability (Non-critical penetrating hits needed to sink ship):
38,157 lbs / 17,308 Kg = 13.1 x 18.0 " / 457 mm shells or 2.7 torpedoes
Stability (Unstable if below 1.00): 1.17
Metacentric height 7.8 ft / 2.4 m
Roll period: 16.6 seconds
Steadiness - As gun platform (Average = 50 %): 55 %
- Recoil effect (Restricted arc if above 1.00): 0.69
Seaboat quality (Average = 1.00): 1.10
Hull form characteristics:
Hull has a flush deck
Block coefficient: 0.419
Length to Beam Ratio: 8.64 : 1
'Natural speed' for length: 30.82 kts
Power going to wave formation at top speed: 58 %
Trim (Max stability = 0, Max steadiness = 100): 50
Bow angle (Positive = bow angles forward): 3.00 degrees
Stern overhang: -2.00 ft / -0.61 m
Freeboard (% = measuring location as a percentage of overall length):
- Stem: 38.00 ft / 11.58 m
- Forecastle (20 %): 33.00 ft / 10.06 m
- Mid (50 %): 33.00 ft / 10.06 m
- Quarterdeck (15 %): 33.00 ft / 10.06 m
- Stern: 33.00 ft / 10.06 m
- Average freeboard: 33.40 ft / 10.18 m
Ship space, strength and comments:
Space - Hull below water (magazines/engines, low = better): 124.3 %
- Above water (accommodation/working, high = better): 254.4 %
Waterplane Area: 65,089 Square feet or 6,047 Square metres
Displacement factor (Displacement / loading): 97 %
Structure weight / hull surface area: 226 lbs/sq ft or 1,105 Kg/sq metre
Hull strength (Relative):
- Cross-sectional: 0.93
- Longitudinal: 2.00
- Overall: 1.00
Hull space for machinery, storage, compartmentation is cramped
Room for accommodation and workspaces is excellent
This is a forum for discussion of topics relating to the Dreadnought era, prior to the ascendency of naval aviation. We will be discussing history, ship design, and naval wargaming.
Wednesday, August 24, 2005
A better approach to more speed
A better way to reach higher speed is to increase the length. By doing that, I provided better protection, while achieving better seakeeping and slightly less draft, although too great at 38ft. The new dimensions were 950ft x 110ft x 38ft with a displacement of 47,500 tons. The speed was still 42 knots. The armament was the same with 6-18in and 12-5in QF guns. This is the final Springsharp report:
No comments:
Post a Comment