GB/DL/1921 very fast, Great Britain Destroyer Leader laid down 1921 (Engine 1950) Displacement: 2,176 t light; 2,276 t standard; 2,464 t normal; 2,614 t full load Dimensions: Length (overall / waterline) x beam x draught (normal/deep) (411.65 ft / 408.00 ft) x 37.00 ft x (14.00 / 14.54 ft) (125.47 m / 124.36 m) x 11.28 m x (4.27 / 4.43 m) Armament: 6 - 5.10" / 130 mm 55.0 cal guns - 72.00lbs / 32.66kg shells, 150 per gun Quick firing guns in turret on barbette mounts, 1921 Model 3 x Twin mounts on centreline ends, majority aft 1 raised mount aft - superfiring 2 - 4.00" / 102 mm 45.0 cal guns - 32.00lbs / 14.51kg shells, 150 per gun Anti-air guns in deck and hoist mount, 1921 Model 1 x Single mount on centreline, aft deck forward 8 - 1.57" / 40.0 mm 45.0 cal guns - 2.00lbs / 0.91kg shells, 150 per gun Anti-air guns in deck mounts, 1921 Model 2 x 2 row quad mounts on sides, forward deck aft Weight of broadside 512 lbs / 232 kg 6 - 21.0" / 533 mm, 22.00 ft / 6.71 m torpedoes - 1.425 t each, 8.551 t total In 2 sets of deck mounted carriage/fixed tubes Armour: - Gun armour: Face (max) Other gunhouse (avg) Barbette/hoist (max) Main: 2.00" / 51 mm 1.00" / 25 mm 2.00" / 51 mm Machinery: Oil fired boilers, steam turbines, Geared drive, 2 shafts, 60,696 shp / 45,280 Kw = 37.00 kts Range 4,200nm at 14.00 kts Bunker at max displacement = 337 tons Complement: 174 - 227 Cost: £0.771 million / $3.083 million Distribution of weights at normal displacement: Armament: 152 tons, 6.2 % - Guns: 143 tons, 5.8 % - Torpedoes: 9 tons, 0.3 % Armour: 78 tons, 3.2 % - Armament: 78 tons, 3.2 % Machinery: 1,211 tons, 49.1 % Hull, fittings & equipment: 736 tons, 29.9 % Fuel, ammunition & stores: 288 tons, 11.7 % Miscellaneous weights: 0 tons, 0.0 % Overall survivability and seakeeping ability: Survivability (Non-critical penetrating hits needed to sink ship): 590 lbs / 267 Kg = 8.9 x 5.1 " / 130 mm shells or 0.3 torpedoes Stability (Unstable if below 1.00): 1.09 Metacentric height 1.3 ft / 0.4 m Roll period: 13.5 seconds Steadiness - As gun platform (Average = 50 %): 52 % - Recoil effect (Restricted arc if above 1.00): 0.83 Seaboat quality (Average = 1.00): 1.04 Hull form characteristics: Hull has rise forward of midbreak, a normal bow and large transom stern Block coefficient (normal/deep): 0.408 / 0.417 Length to Beam Ratio: 11.03 : 1 'Natural speed' for length: 23.15 kts Power going to wave formation at top speed: 67 % Trim (Max stability = 0, Max steadiness = 100): 50 Bow angle (Positive = bow angles forward): 8.00 degrees Stern overhang: 0.00 ft / 0.00 m Freeboard (% = length of deck as a percentage of waterline length): Fore end, Aft end - Forecastle: 18.00 %, 26.00 ft / 7.92 m, 24.00 ft / 7.32 m - Forward deck: 16.00 %, 24.00 ft / 7.32 m, 23.00 ft / 7.01 m - Aft deck: 51.00 %, 15.00 ft / 4.57 m, 15.00 ft / 4.57 m - Quarter deck: 15.00 %, 15.00 ft / 4.57 m, 15.00 ft / 4.57 m - Average freeboard: 18.12 ft / 5.52 m Ship space, strength and comments: Space - Hull below water (magazines/engines, low = better): 179.6 % - Above water (accommodation/working, high = better): 176.4 % Waterplane Area: 9,691 Square feet or 900 Square metres Displacement factor (Displacement / loading): 70 % Structure weight / hull surface area: 38 lbs/sq ft or 187 Kg/sq metre Hull strength (Relative): - Cross-sectional: 0.43 - Longitudinal: 2.20 - Overall: 0.51 Hull space for machinery, storage, compartmentation is cramped Room for accommodation and workspaces is excellent
Amazon Ad
Saturday, August 18, 2007
A very fast British super-destroyer: GB/DL/1921
I wanted to have a very fast British super-destroyer to work with the very fast heavy and light cruisers. I suspect that this ship is much larger than it should be, due to limitations with the current Springsharp 3.0b2 Beta. My ship has 6-5.1in QF guns in turrets, with one forward and two aft. There are also 2-4in AA and 8-2pdr AA guns, with 6-21in TT. The top speed is 37 knots and I made the ship large and long enough so that the design works well. This is the Springsharp report:
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment